HVAC/R Sensors
Company Overview
Catalog/Price Book
Instruction Sheets
Ordering & Shipping
BAPI Distributor List
Contact Us
Building Automation Products, Inc.,
Tel: +1-608-735-4800
Fax: +1-608-735-4804
Copyright © 2007 BAPI
BAPI ACCESSORIES OVERVIEW
VC75, VC100 & VC350 Voltage Converters  Snaptrack-mountable 75, 100 & 350 mA voltage converters • 2.5 Amp Voltage Converters |
VC2700-STM - 2.7 Amp Voltage Converter A snaptrack-mountable 2.7 amp power supply. The unit takes a 18-30 VAC input and converts it to a regulated and adjustable output of 3-26 VDC or a fixed output of 5 or 15 VDC. |
PS17 & PS17CB Power Supplies The PS17 and PS17CB Power Supplies provide up to six 33 VDC, 3 Amp power supplies each. The PS17 features a 3 Amp fuse on each output while the PS17CB has a 3.15 Amp circuit breaker on each output. |
 The BAPI-Guard™The BAPI-Guard thermostat protector prevents tampering, physical damage and unauthorized adjustment of thermostats. The attractive, low-profile design is available in two sizes to fit most thermostats. |
 Custom Logo Plates If you would like to personalize the look of your temperature, humidity or pressure sensor, BAPI’s units are available with your company’s individual logo printed on the front. |
 Loop Powered Indicator The Loop Powered Indicator provides LCD indication of any 4 to 20 mA signal (temperature, humidity or pressure) either at the sensing point or a remote location. |
 Foamback Insulator Made of medical grade, closed cell foam, the Foamback Insulator insures that Room Units are reading the temperature of the room, not the temperature of the wall. |
 Adaptor Plates The Adaptor Plate is a quick, easy and attractive solution for retrofits where a larger Room Unit (or sensor) has been previously mounted. |
 Sealant Filled Connectors BAPI’s Sealant Filled Connectors (SFC) contain a moisture-excluding sealant which encapsulates the electrical connection protecting it from moisture and oxidation. |
Screwdriver & Allen Wrench Combos  The BAPI Screwdriver & Allen Wrench Combinations are especially useful for installing BAPI Room Units. |
| Security Screws Spanner Security Screws add an extra level of protection for Wall Plates 
|
RJ22L Adaptor  Converts the standard RJ11 Comm. Jack to the smaller RJ22 dimensions. |
 Field Mounting Kit This kit provides the extra room that is sometimes needed to make a proper field wiring connection. The kit can be attached to any sensor or device that has a 1/2-inch conduit hole. |
 Replacement Keys Replacement keys are available for Wall Plates and the BAPI-Guard thermostat protectors. |
Hex Head & Pan Head Screws & Wall Anchors Used for mounting the BAPI-Guard Thermostat Protector or the BAPI-Box Enclosure. |
