BAPI-Stat 2 Room Unit
Temperature Sensors

---

A smaller version of the original BAPI-Stat with a large LCD display

• New Enclosure Style
• Robust Tactile Pushbuttons
• Larger LCD Display
• Increased Functionality
• Setpoint Adjustment and Occupancy Override
• Optional Fanspeed & Mode Control
• Optional Comm. Jack and Test & Balance
• Wide Selection of Temp. Sensing Elements
• Two Year Warranty

  The BAPI-Stat 2 has all the features of the RµP Family rolled into a single enclosure. The BAPI-Stat 2 is similar in size to the Delta enclosure but with a larger LCD display and greater functionality. It provides local indication of Temperature and Setpoint with Setpoint Adjust and Override. It also has optional Fanspeed and Mode Control for applications with Fan Coils, Heat Pumps or Unit Ventilators.  
   The Setpoint Adjust is available as a slidepot or as pushbuttons and is displayed on the LCD for a short time after an adjustment. The Setpoint can be displayed as an offset (i.e. -2, -1, 0, 1, 2) or as a value within a specified temperature range (i.e. 65 to 80 °F). The Override is a momentary signal that can be configured in parallel with the sensor or setpoint, or as a separate output or a latching switch. An optional 3.5mm (1/8”) or RJ11 Communication Jack can be mounted in the base to provide direct access to the network.

Datasheets (PDF) BAPI-Stat 2M and 2S Datasheet List Pricing (PDF) BAPI-Stat 2M and 2S Unit List Pricing

For detailed specifications on the individual Sensors & Transmitters, see Sensor Specs

Installation and Operation Sheets (PDF) BAPI-Stat 2M and 2S Units

VISIO Files (2002 version) Half Scale BAPI-Stat 2 Temperature Only Unit (1.5 Meg) Full Scale BAPI-Stat 2 Temperature Only Unit with Wiring Connections (11.5 Meg) VISIO Files (2003 version) Half Scale BAPI-Stat 2 Temperature Only Unit (200K) Full Scale BAPI-Stat 2 Temperature Only Unit with Wiring Connections (1.1 Meg)

Size Comparison: Delta, BAPI-Stat and BAPI-Stat 2
The BAPI-Stat 2 is similar in size to the Delta Enclosure (4.25" high x 2.65" wide), and is about 25% smaller than the original BAPI-Stat (5.5" high x 3.4" wide).	BAPI-Stat 2	Delta	BAPI-Stat

 

 

 

 

 

 

---

The BAPI-Guard™ Thermostat Protector The BAPI-Guard prevents tampering, physical damage and unauthorized adjustment of thermostats. The attractive, low-profile design is available in two sizes to fit most thermostats. It is made of thick, durable polycarbonate and features exceptional airflow, key lock protection, horizontal or vertical mounting and easy installation with hardware included.

---

VC75 (AC to DC Voltage Converter) For more stable operation of sensors, BAPI recommends using DC rather than AC voltage. With its compact size and rugged design, BAPI’s VC75 is the perfect AC to DC converter. See the Accessories section for more info. Why does BAPI recommend using DC vs AC power on sensors?