HVAC/R Sensors
Company Overview
Catalog/Price Book
Instruction Sheets
Ordering & Shipping
BAPI Distributor List
Contact Us
Building Automation Products, Inc.,
Tel: +1-608-735-4800
Fax: +1-608-735-4804
Copyright © 2007 BAPI
Humidity & Temp./Humidity Combo Sensors
The Washdown Wall Plate Power Supply (VPS) provides power to the Wall Plate Units as well as to the Analog Output Modules which convert the temperature and humidity data from the Wall Plate into a resistance, voltage or current signal for the DDC controller.
The Analog Output Modules receive the temperature or humidity data from the Washdown Wall Plate through an RS485 bus. One Power Supply can support up to 15 different Wall Plates and up to 30 different Output Modules. Each Output Module is easily trained to a specific Wall Plate signal with a pushbutton and LED. The modules are surface, 2.75” snaptrack or 35mm din rail mountable.
The Analog Output Modules convert the Temperature or Humidity data from the Washdown Wall Plate Unit into a Resistance, Voltage or Current Signal for the DDC controller.
The Analog Output Modules are connected to a Washdown Wall Plate Power Supply and receive the temperature or humidity data through an RS485 bus. Up to 30 different Output Modules can be connected to a single Power Supply; therefore one Power Supply can power up to 15 different Wall Plates. Each Output Module is easily trained to a specific Wall Plate Unit signal with a pushbutton and LED.
|
||||
For detailed specs on the individual Sensors & Transmitters, see Sensor Specs. |
||||
|
|
Vivarium Combo Wall Plate Sensor and Room Unit
The Vivarium Wall Plate Unit is also available as a Combination Wall Plate Sensor and Room Unit called a "Vivarium Combo".
Washdown Wall Plate Power Supply
Washdown Wall Plate Power Supply and Analog Output Modules
