flashover. BAPI offers three types of SFCs: a Crimp-On, a Round Crimp-On and a Twist-On. The Crimp-On SFC1000 accepts two 22 to 26 AWG wires. It has a voltage rating…
a CO2 sensor. The advantage of the VOC sensor is that it measures air contaminants from other sources besides respiration, such as building materials, cleaners, perfumes and furniture and carpet…
The Duct Static Pressure Probes and Assemblies connects to BAPI’s Zone Pressure Sensor to measure duct static pressure. Assemblies include a 6″ aluminum tube, foam pad, rubber tubing with built…
Concave Remote Probes feature a 1.35” long brass encapsulation shell with a concave indention so that they fit on the outside of pipes such as condenser lines. They come with…
BAPI’s Carbon Monoxide Sensor offers enhanced electrochemical sensing with outstanding accuracy at low concentrations. The Duct unit samples duct air using an aspiration tube. The Rough Service unit features a…
The PS17RF, PS18RF and PS19RF Power Supplies provide multiple 33 VDC outputs with over-current protection and self-resetting fuses. All power supplies are furnished with standard 2.75” snaptrack and include a…
unit uses an aspiration tube, while the Rough Service unit uses a ventilated BAPI-Box and is ideal for areas such as outdoor air plenums, equipment rooms, green houses and warehouses….
LEDs on the face of the unit indicate when the pressure is low, in range or high for line-of-sight troubleshooting without accessing the BAS. Ranges and Outputs are set in…
The PMPB5 receives the pulse output from electrical, water or gas meters and recreates the pulses as dry contact closures to isolate the pulses from the BAS controller’s input….
The Clean-Cut hole cutter is designed to remove the plastic plugs in the ½” NPSM threaded ports of the BAPI-Box and BAPI-Box 2 plastic enclosures. This tool makes removing the…
