Wireless to Analog
Integrate MORE with EASE
BAPI’s Wireless System offers a cost-effective and reliable alternative to hard-wired HVAC systems. The suite of room and non-room sensors transmit their data to Wireless to Analog Output up to 100 feet away. The user-adjustable receiver then converts the data into a voltage or resistive value for a controller of a BAS.
BAPI’s Wireless System provides both flexibility and reliability. Each sensor/transmitter features a customizable transmission rate and transmission power, which allows users to optimize battery life and signal reliability at each unique installation. The Wireless to Analog Output supports up to 32 sensors and 127 Analog Output Modules. The Receiver and Analog Output Modules can be surface, snaptrack or DIN rail mounted.
Wireless to Analog Receiver
The Wireless to Analog Receiver from BAPI receives the data from one or more wireless sensors. The data is then transferred to the Analog Output Modules and converted to an analog voltage or resistance. The receiver supports up to 32 sensors and up to 127 different Analog Output Modules. The receiver includes user-adjustable settings and 100 foot in-building range, dependent on obstructions and building materials.
User Adjustable Settings
The Wireless to Analog Receiver from BAPI receives the signal from one or more wireless sensors and supplies the data to Analog Output Modules. The modules convert the signal to an analog voltage or resistance which connects directly to your BMS system.
- Field Selectable Settings:
- Sample Rate/Interval
- Transmit Rate/Interval
- Delta Temperature
- Delta Humidity
- Can accommodate up to 127 different output modules
- Three analog output module options:
- Setpoint Output Module (SOM)
- Voltage Output Module (VOM)
- Resistance Output Module (ROM)
Wireless to Analog Receiver
The Wireless to Analog Receiver from BAPI receives the data from one or more wireless sensors. The data is then transferred to the Analog Output Modules and converted to an analog voltage or resistance. The receiver supports up to 32 sensors and up to 127 different Analog Output Modules. The receiver includes user adjustable settings and a 100 foot in-building range, dependent on obstructions and building materials.
The Wireless to Analog Receiver from BAPI receives the signal from one or more wireless sensors and supplies the data to Analog Output Modules. The modules convert the signal to an analog voltage or resistance which connects directly to your BMS system.
- Field Selectable Settings:
- Sample Rate/Interval
- Transmit Rate/Interval
- Delta Temperature
- Delta Humidity
- Can accommodate up to 127 different output modules
- Three analog output module options:
- Setpoint Output Module (SOM)
- Voltage Output Module (VOM)
- Resistance Output Module (ROM)
Analog Output Modules
The Wireless Receiver from BAPI receives the signal from one or more wireless sensors and supplies the data to Analog Output Modules through an RS485 four-wire bus. The modules convert the signal to an analog voltage or resistance for the controller. The receiver can accommodate up to 127 different modules.
The modules are easily trained to a single sensor variable with a pushbutton and LED. All modules are surface, 2.75” snaptrack, or 35mm DIN rail mountable. They are powered by the receiver, or optionally may be powered separately when the Pluggable Terminal Block Kit is used for remote connections.
The Resistance Output Module (ROM) converts the temperature data from the BAPI Receiver into a resistance for the BAS controller. The unit is factory calibrated to output a 10K-2, 10K-3, 10K-3(11K) or 20K thermistor curve.
The Voltage Output Module (VOM) converts the temperature or humidity data from the BAPI Receiver into a linear 0 to 5 or 0 to 10 volt signal for the controller. There are eight factory set temperature ranges (°F and °C) and four humidity ranges of 0 to 100% or 35 to 70%RH.
The Setpoint Output Module (SOM) converts the setpoint data from the BAPI receiver into a resistance or a voltage for the BAS controller. There are five factory set voltage and resistive ranges, each with an optional override function.
The units are available with an occupancy override signal in parallel with the setpoint output. For resistance output units, the resistance goes to 0Ωbriefly when the override button is pressed. For voltage output units, the voltage goes to 0V briefly when the override button is pressed.
Analog Output Modules
The Wireless to Analog Receiver receives the signal from one or more wireless sensors and supplies the data to Analog Output Modules through an RS485 four-wire bus. The modules convert the signal to an analog voltage or resistance for the controller. The receiver can accommodate up to 127 different modules.
The modules are easily trained to a single sensor variable with a pushbutton and LED. All modules are surface, 2.75” snaptrack, or 35mm DIN rail mountable. They are powered by the receiver, or optionally may be powered separately when the Pluggable Terminal Block Kit is used for remote connections.
The Resistance Output Module (ROM) converts the temperature data from the BAPI Receiver into a resistance for the BAS controller. The unit is factory calibrated to output a 10K-2, 10K-3, 10K-3(11K) or 20K thermistor curve.
The Voltage Output Module (VOM) converts the temperature or humidity data from the BAPI Receiver into a linear 0 to 5 or 0 to 10 volt signal for the controller. There are eight factory set temperature ranges (°F and °C) and two humidity ranges of 0 to 100% or 35 to 70%RH.
The Setpoint Output Module (SOM) converts the setpoint data from the BAPI receiver into a resistance or a voltage for the BAS controller. There are five factory set voltage and resistive ranges, each with an optional override function.
The units are available with an occupancy override signal in parallel with the setpoint output. For resistance output units, the resistance goes to 0Ωbriefly when the override button is pressed. For voltage output units, the voltage goes to 0V briefly when the override button is pressed.
Wireless to Analog Receiver, Analog Output Modules & Wireless Sensors
The same high-quality, 100% tested sensors BAPI has made for 30 years, just built with our wireless system integration. Our highly accurate Wireless Sensors are perfect for integrating into your current BAS using our Wireless Receiver and Analog Output Modules.
Outside Air Sensor
- Temperature or Temperature/Humidity
- Barometric pressure sensing
- Optional light level sensing
BAPI-Stat Quantum
- Temperature or Temperature/Humidity
- Optional temperature setpoint and occupant override
Remote Temperature Sensor
- Plenum-rate or FEP-jacketed cable, 5 ft. to 25 ft. length
- 2″ Stainless Steel Probe
Resistance Output Module
- Converts data from receiver to controller
- Multiple factory calibrated outputs
- Trained to a single sensor variable
Duct Sensor
- Temperature or Temperature/Humidity
- IP66-rated BAPI-Box Enclosure
- Stainless Steel Probes from 4″ to 18″
BAPI-Stat Quantum Slim
- Temperature or Temperature/Humidity
- Internal or remote sensor
- Perfect for freezers, coolers, server racks, etc.
Voltage Output Module
- Receives temp or humidity data
- Converts signal to 0-5 or 0-10 volts
- Trained to a single sensor variable
Wireless to Analog Receiver
- User adjustable settings
- Output is converted by Output Modules
- Supports up to 32 sensors & 127 Output Modules
Immersion Temperature Sensor
- Rugged BAPI-Box IP66-rated enclosure
- Stainless Steel Probes (2″, 4″, or 8″)
Thermobuffer Sensor
- Ideal for Freezers and Coolers
- 2″ or 4″ attached chamber, or 1″ hanging bracket
- Tracks the temp of the contents rather than air temperature
Setpoint Output Module
- Converts Setpoint data into resistance or voltage
- Occupancy override signal in parallel available
- Trained to a single sensor variable
Have questions? Ready to send your site verification values?
We’re here to help!
